Parts Of A Ring Setting

This is the part of the ring that holds the center stone in place. The bezel is a wider, and usually thicker, section of the hoop of a ring, which may contain a flat surface, or a gem.

Pin by Jan Mosser on Getting married Jewelry, Engagement

The part of the ring that holds your stone, and attaches it to the rest of the ring.

Parts of a ring setting. This is the luxurious diamond that you pick from our array of diamonds. This is also known as a band. The pavé setting is a ring setting that features small diamonds along the band of the ring.

Sometimes referred to as the setting, this is the piece that holds the center stone in a ring. The setting style of a ring refers to the placement of gemstones along the ring. The part of the ring right next to the head.

The word may also refer to a bezel setting for a stone, which is a general term for a setting holding the stone in place using a raised surrounding for the stone with a lip encircling and overlapping the edges of the. At wilson diamonds, we make sure that this part of the ring fits your finger perfectly. The setting provides more than security for your diamond.

Here’s a primer on the basic kinds of ring settings. The prongs are a type of setting. The function performed by the control ring can be selected using the [control ring setting] option in the setup menu.

The bezel setting places a single gemstone within a. This is also the part that wears down the most, due to banging and rubbing against hard objects. There are many different settings to choose from.

The process involves cutting away the worn or damaged section and then soldering a new piece into the ring. Being one of the oldest names in diamonds and made famous by the movie breakfast at tiffany's, a tiffany setting is perfect for the fiance obsessed with romance. The shanks are the sides of the ring where side stones can often be found.

An ancient method of setting gems, a flush setting, also called a “hammer” setting, provides great protection for the gemstone. Tiffany settings are a very classic ring style. The french word translates to ‘paved’ and this jewelry technique was named as such because it.

A partial bezel setting only encircles parts of the gemstone. This tight fitting ring should make a friction fit all around the inside of the primary bezel. This type of setting gives the illusion that a gemstone appears larger than it is.

The band of your ring. Platinum or gold plated sterling silver round ring set made with swarovski zirconia. To achieve this, the gemstone is set onto a shiny metal ring cut to mimic the facets of the stone.

While this area is usually structurally sound, shoulders with side diamonds on them can need repair frequently as the settings are fragile. After a gem has been mounted in the setting, the jewelry piece is referred to by its name. This includes clasps, bails, metal loops, and stringing material for threading beads.

This setting provides great protection and a sleek, understated look. Tiffany's has a rich history next to other famous jewelers such as cartier and harry winston. The top two sides of the ring.

The shank is divided into the upper and lower shanks. A jeweler drills a hole into the ring metal, places the gem, and hammers metal around it to hold it in place. Manual focus (*1) *1 manual focus mode only.

The ring is normally worn to display the bezel on the upper or outer side of the finger. Ring blank for 7x9mm/8x10mm/9x11mm/10x12mm/12x16mm/13x18mm oval cabochons ring setting gold plated 925 silver adjustable ring base sr0067 (matte yellow gold,8x10mm) 5.0 out of 5 stars1. Because the sides are uncovered, light is able to reflect of these areas of the stone, resulting in more.

The shank, or body of the ring, and the head or gallery — the metal that sets the diamond into place. It’s an important feature of the diamond’s look. Technically, a ring is made up of two parts:

If you have an unfinished ring, brooch, pendant, or other item with a place to hold a gem, it’s referred to as a setting. This strip of metal can be thin or weak, making it prone to damage. The shoulder is what attaches the shanks to the setting.

This engagement ringstyle elegantly showcases the center diamond with no distraction from side stones on the band or shank, and their plain metal bands. The benefit of the partial bezel is that the stone is more visible and can appear larger. The channel setting has two metal tracks with a row of tiny gemstones in between.

The metal diffuses the outline of the stone, creating the illusion of a larger stone. A solitaire setting is timeless and many customers enjoy it because it is not subject to the whims of fashion. It is further held by rivets, engraved stitches, adhesive or tin solder.

The shank has an upper and lower part.

ThreeStone Halo Diamond Engagement Ring Three stone